Saving money with correct colour specifications

Friday 30 August 2019

Make sure your identity guidelines have either Pantone or CMYK values for each colour

Make sure your identity guidelines have either Pantone or CMYK values for each colour – and ideally both

Are you planning to adopt a ‘web first’ approach to marketing your new business? Or perhaps you are about to have your existing web site overhauled and your branding refreshed? Then pull up a pew, and allow me to save you some money.

I specialise in design for print – I don’t design web sites. So how, I hear you ask, can I help?

When you’re fully absorbed in the complex process of creating a web site it’s easy to lose sight of the bigger picture – how your new branding will work in all the scenarios that might occur in the future. There are a lot of things to consider. But for this post, I want to share just three very simple pieces of advice about colour:

  1. Make sure that whoever is creating or refreshing your visual identity (particularly your logo and brand colour palette) knows if you ever intend to produce any physical items.
  2. When discussing colours, always ask how each one will work in print.
  3. Make sure that your new identity guidelines have either Pantone or CMYK references for each colour – and ideally both.

And that’s it. But why is it important?

You need to make sure the colours are achievable in print

Print uses CMYK, rather than RGB, and the two resulting colour gamuts are not identical. So, unless you never intend to produce anything physical at all,* then each colour needs to be achievable in CMYK. If it isn’t, then you may find you have to pay extra to use a spot colour or foil every time you have something printed.

You need a benchmark of each colour

If you rely upon screen representations of colour then nobody will know how each colour is supposed to look because it will look different on almost every screen. This is one of the reasons why things you choose on the internet often turn out not to be quite the colour you thought they’d be, but it will also make it difficult to evaluate the accuracy of any completed print.

You need to be able to communicate the colours

Pantone is the design industry’s answer to describing colour. By simply having a Pantone colour reference you will be able to communicate the colour to designers and printers – and achieve a greater degree of accuracy and valuable consistency across your brand.

Do you need both CMYK and Pantone?

In short, no. The minimum requirement would be a set of Pantone references. It’s fair to say that some people will never print a solid PMS (Pantone Matching System) colour, but Pantone swatch books provide the industry-standard colour benchmark, as well as conversions into CMYK, RGB, and Hex. This allows designers to look up everything they need to know about a colour. Of course, not everyone has access to a Pantone swatch book, so it’s helpful if your brand palette has a CMYK breakdown for each colour too.

It’s important to recognise that not all Pantone colours can be matched in CMYK, particularly when printing litho. So it’s a good idea to ask your designer to show you the Pantone swatch. This will allow you to see the CMYK equivalent and, if you plan to use both solid and process versions of the colour, ensure that the CMYK conversion is a good match.

If your palette only shows CMYK values then they may have been calculated by converting the Hex/RGB values used on your website into CMYK. That’s ok, you might think, but has anyone ever seen how this mix of cyan, yellow, magenta, and black ink prints? Probably not. And so, unless you go through a process of colour testing to create your own physical colour references for a CMYK colour, there will be no reliable benchmark for you to match against, and no way to visualise it.

How could having the right colour specifications save you money?

Reliable colour specifications will avoid added costs from any designer who is working on your printed materials in future. It will save them trying to identify the colour you want from an approximation on their screen, or spending time pouring over a Pantone swatch book – either of which could result in potentially expensive news. You will also avoid the need to go through a process of colour testing to create your own custom set of physical colour references.

By making it clear that you want to be able to use your branding in print you could also avoid having to fork out for some of these additional production costs:

  • A spot colour – a special, premixed ink used on press. Spot colours can reliably achieve some of the colours which standard CMYK cannot. But when used in addition to standard CMYK they can add a lot of extra cost to a job.
  • A foil – sometimes the only way to achieve a particularly rich or vibrant colour. Again, extra costs are involved and foil might not always be a viable solution depending upon the colour and design.
  • A press-pass – your designer adjusts the colours to match their perception of the shades you want while your job is being printed – tricky!
  • A wet proof – setting up the press and running just one copy, stopping the press, sending you the single copy for approval, and then restarting production – time-consuming and costly.
  • A reprint – printing everything all over again when your business cards come back looking decidedly iffy. This could be very expensive!

If you would like help making your colour palette as cost effective to work with as possible, please feel free to get in touch.

* Are you sure you're never going to have business cards? Or product packaging? Or adverts in the press? Or bags? Or staff uniforms, or signage?